Micro-Mesh® fiberglass reinforced plastic (FRP) access flooring system is designed as a low cost alternative to aluminum, steel, stainless steel and other materials in applications where corrosion resistant under-floor access and unobstructed air flow is required. Lightweight, 2' x 2' Micro-Mesh panels are easily removed, providing ready access to electrical conduits, air supply plenums and service lines.
Micro-Mesh panels are the right choice to minimize vibration from rolling cart or wheelchair traffic. The ADA compliant ½” open area between bearing bars also prevents small tools and other objects from falling through the grating to the surface below. The “15 mm ball test” requirement, common in Europe and in offshore applications, is easily met by Micro-Mesh panels.
Adjustable quad-head grating pedestals allow for a fast, smooth installation and readily adjust to sub-floor contour to provide a level flooring surface. Micro-Mesh panels come standard with a smooth top and arc also available with meniscus and applied grit tops.
N/ALoad capacity and deflection data was developed using the Recommended Test Procedures for Access Floors by the Ceilings & Interior Systems Construction Association (CISCA). Setup requires that panels “…shall be supported on an understructure support identical to that utilized in an installed system”.
All Load Points 1" Aquare Conditions:
CASE I.
Concentrated loading at the center of the panel (centroid)
CASE II.
Concentrated loading at the mid point of the edge (centerline edge)
CASE III.
Ultimate Capacity - Concentrated loading at the center of the panel (centroid)
CASE IV.
Ultimate Capacity - Concentrated loading at the midpoint of the edge (centerline edge)
CASE V.
Ultimate Capacity - Concentrated loading at the “weakest point” of the panel
